NeoDeck audio outputs and connections

Studio-Grade Audio,
Built Right In

Dual stereo outputs, professional DAC, and ultra-low latency — no external soundcard required.

The Soundcard Problem, Solved

Every laptop-based DJ setup requires an external audio interface. The built-in headphone jack on a MacBook can only output a single stereo signal — but DJing requires at least two: one for the main output to the speakers and one for headphone cueing so you can preview the next track. This means carrying an additional USB device, an additional cable, and adding another potential failure point to your setup.

NeoDeck eliminates this requirement entirely by integrating a professional-grade audio interface directly into the device. With dual independent stereo outputs — main and headphone/booth — you get proper DJ monitoring without any additional hardware. The built-in DAC delivers clean, high-fidelity audio that rivals dedicated audio interfaces costing hundreds of dollars.

Beyond convenience, there's a performance advantage. Because the audio hardware is integrated and the OS kernel is tuned for real-time audio, NeoDeck achieves latency as low as 2.5ms. That's fast enough for scratching, beat juggling, and live effects to feel completely natural and responsive — something many external USB audio interfaces struggle to match consistently.

NeoDeck audio interface close-up showing outputs

Audio Engineered for the Booth

Professional sound quality with zero external hardware.

Dual Stereo Outputs

NeoDeck provides two independent stereo output channels: a main output for the house sound system and a dedicated headphone/booth output for cueing and monitoring. Both channels run simultaneously with zero crosstalk, giving you the same independent monitoring that professional club setups demand.

Professional-Grade DAC

The built-in digital-to-analog converter delivers clean, transparent audio reproduction with a dynamic range exceeding 100 dB. Your audience hears every detail of your mix — the precision of your EQ adjustments, the warmth of your filters, and the punch of your transitions — without the noise floor of consumer-grade audio.

Ultra-Low Latency

NeoDeck's audio pipeline is engineered for real-time performance. With latency as low as 2.5ms, the delay between touching your controller and hearing the result is imperceptible. Scratching, beat juggling, and live effects all feel instant and responsive — exactly as they should.

No External Soundcard

Traditional DJ setups require a separate USB audio interface — another device to carry, another cable to manage, another point of failure. NeoDeck integrates the audio interface directly into the device. One less box in your bag, one less thing that can go wrong at a gig.

Pre-Routed Audio

Audio routing is configured out of the box. Main output goes to the house system. Headphone output goes to your cue mix. There's no need to open audio settings, select devices, or configure channel assignments. The routing is locked in and correct every time you power on.

Ground Loop Protection

NeoDeck's audio outputs are galvanically isolated to prevent ground loops — the annoying hum that plagues many DJ setups when connecting to venue sound systems. Clean power design and isolated grounds mean you get pristine audio regardless of the venue's electrical situation.

Audio Quality Is Non-Negotiable

For Club Residents

You play the same venue every week. With NeoDeck permanently installed, the audio routing is always correct — main to the house system, headphone to your monitoring. No re-patching cables, no checking settings, no "Can you hear anything?" moments with the sound engineer. Power on and play.

For Scratch DJs

Scratching demands imperceptible latency. At 2.5ms round-trip, NeoDeck's audio pipeline is fast enough that the physical inertia of a jog wheel introduces more delay than the digital processing. Your scratches, transforms, and beat juggles feel as immediate as they would on vinyl.

For Mobile DJs

Every venue has different power, different grounding, different audio systems. Ground loops — that persistent hum when you connect your laptop to the mixer — are a constant battle. NeoDeck's galvanically isolated outputs eliminate ground loop noise regardless of the venue's electrical environment.

For Audiophiles

A DAC with over 100 dB dynamic range and less than 0.005% total harmonic distortion means your audience hears the music, not the electronics. Whether you're playing compressed MP3s or lossless FLAC files, NeoDeck's audio output is transparent and faithful to the source material.

Audio Specifications

Output Channels4 (2x stereo: Main + Headphone/Booth)
DAC Resolution24-bit / 96 kHz
Dynamic Range> 100 dB
THD+N< 0.005%
LatencyAs low as 2.5 ms (round-trip)
Main OutputRCA stereo (unbalanced)
Headphone Output3.5 mm stereo jack
Ground IsolationGalvanically isolated outputs

Ditch the External Soundcard.
Get Pro Audio Built In.

Join the waitlist for a DJ computer with studio-grade audio right out of the box.

Get Early Access